Free Match products are ideal where an indoor unit is required for each room, for example a living room and 3 bedrooms. The system allows you to combine up to 5 internal units with a single external unit. Indoor units can be of different types, including ducted, wall-mounted, cassette, and ceiling/floor.
Hisense Trial Split Ducted Air Conditioner 12+12+12 with 3AMW72U4RFA R-32 12000+12000+12000 with Standard and Wired Remote Control
Technical features
Internal Units
Model :
- Internal Unit Code: 3 x ADT35UX4RBL4
- Cooling Capacity: 3.52 kW
- Heating Capacity: 3.8 kW
- Treated air: 10.0 m3
- Sound pressure level (min - max): 30-36 dB(A)
- Dimensions (WxHxD): 910×190×447 mm
- Weight: 18.0 kg
- Liquid pipe diameter: 6.35 (1/4) mm
- Gas pipe diameter: 9.52 (3/8) mm
External Unit
Model:
- Indoor Unit catalog code: 3AMW72U4RFA
- Max indoor units: up to 3 indoor units
Cooling down
- SEER: 6.11
- Cooling energy class: A++
- Annual energy consumption: 401 kW/a
Heating
- SCOP 4.01
- Heating energy class A+
- Annual energy consumption 2618 kWa
Performance
- Sound power: 68 dB(A)
- Sound pressure: 53/59 dB(A)
- Liquid/gas pipes: 6.35 / 9.52 mm
Dimensions:
- External Unit Dimensions (WxHxD): 860x670x310 mm
- External Unit Weight: 49 Kg
3 year warranty (5 on the compressor)

The Hisense Italia warranty can be activated within 1 month from the date of purchase athttp://www.hisenseitalia.it/clima/supporto
Multisplit line - Free Match
DC drive technology with 180° sine wave
The system constantly monitors the compressor frequency and creates the most efficient waveform to determine effective fuel savings.
Compressor with rubidium magnet
Thanks to the greater compression of the gas molecules, the compressor with rubidium magnet guarantees greater efficiency and lower absorption.
Electronic expansion valve
The outdoor unit uses an electronic expansion valve which adjusts to optimize the amount of refrigerant for all operating indoor units.
Wide voltage range operation
The outdoor unit can operate with a voltage of 176V to 264V. In the new models, the use of an automatic voltage regulation technique guarantees that the protection value adjusts according to it, maintaining the operating frequency at an optimal value.
Exchanger design: designed to improve its efficiency
The design of the external exchanger was designed to increase heat transfer in such a way as to make the refrigeration circuit more efficient and avoid the creation of ice blocks. A further advantage is that it can support long-distance connections between the external unit and internal units without reducing the cooling capacity.
Hisense channeled
Variable static pressure

On the entire range of ducted models it is possible to set the static pressure to guarantee greater installation flexibility
Dual air inlet modes

Advantages: If the distance between the unit and the wall is limited, then you can choose the bottom air inlet by removing the bottom panel of the unit, it will be much easier and more flexible.
The noise level produced by a lower air inlet can increase by up to 5dB compared to using a rear air inlet. We therefore recommend opting for the latter solution
Slim design

With a height of 190 mm, it can be easily installed in residential false ceilings
Built-in rear drainage pan (Optional)

Disadvantage of an external drain pan: It easily attracts dust and bacteria which will cause long-term malfunctions.
Float and condensate drain pump (Optional)
Safety protection

Make sure the compressor is operating in safety mode to avoid damage caused by refrigerant leaks
Product Warranty: All products on sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase