Self-priming electric pump in cast iron Ebara model Aga M 2.00 single-phase motor 2.0

Self-priming cast iron electric pump Ebara Mod. Aga M 2.0 Single-phase motor

• Single-phase motor 230V ±10% 50Hz
• Flow rate up to 100 l/min (6 m³/h)
• Head up to 59 m
• Maximum operating pressure:
  - 6 bar for AGA 0.60-0.75-1.00
  - 10 bar for the rest of the range
• Maximum liquid temperature: 45°C
• Maximum suction depth: 8 m
• Highly energy efficient IE2 and IE3 motors starting from 0.75kW
• Insulation class F
• IP44 protection rating
• Cast iron pump body
• Impeller in PPE+PS reinforced with glass fibers for AGA 0.60-0.75-1.00, in brass for the rest of the range

AGA

The AGA - AGC electric pumps are self-priming cast iron electric pumps equipped with a Venturi group (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to their low weight. The pump body is made of cast iron for all models. Among their peculiarities is that of having the shaft in AISI 303 steel (for the part in contact with the liquid). The impellers available are in PPE + PS reinforced with glass fibers for AGA 0.60 – 0.75 – 1.00 and in brass for the rest of the range. The mechanical seal is in Ceramic/Carbon/NBR. The motors, asynchronous with 2 self-ventilated poles, are highly energy efficient IE3 starting from 0.75 kW.

PUMP TECHNICAL DATA

• Head from 16.5 to 68 m
• Flow rate from 0.3 to 9.6 m3/h
• Maximum operating pressure:
  - 6 bar for AGA 0.60 - 0.75 - 1.00
  - 10 bar for the rest of the range
• Maximum liquid temperature 45°C
• Maximum suction depth 8 m